BWW Sheet metal plate hook
The perfect lift.
The lifting of sheet metal stacks, boards etc. requires perfect tools - and the BWW sheet metal plate hook is one of them. It can also be supplied in customised dimensions upon request. As a standard, it may be used with Connex and the welded system and corresponds with EN 1677‑1 with the mechanical value of G10.
Please note that the product is not suitable for tip loading and that the hooks must be fully pushed onto the load. The lifting process must be carried out by means of min. a III-leg chain sling.
The classification of the WLL must be done carefully:
- If a III-leg chain sling is used, the WLL is that of the corresponding II-leg chain sling
- If a IV-leg chain sling is used, the WLL is that of the corresponding III-leg chain sling
The sheet metal plate hook comes with CE-marking and a full operating manual.
Specifikationstabell
BWW Sheet metal plate hook | Code / Type | load capacity [kg] |
e [mm] |
s [mm] |
b [mm] |
h [mm] |
d1 [mm] |
g [mm] |
weight [kg/pc.] |
---|---|---|---|---|---|---|---|---|---|
BWW 7/8 | 2.500 | 131 | 80 | 50 | 15 | 28 | 55 | 1,50 | BWW 10 | 4.000 | 170 | 100 | 70 | 20 | 36 | 65 | 2,80 | BWW 13 | 6.700 | 209 | 130 | 80 | 25 | 40 | 90 | 5,30 | BWW 16 | 10.000 | 263 | 160 | 100 | 30 | 50 | 110 | 10,50 | BWW 19/20 | 16.000 | 306 | 185 | 120 | 40 | 60 | 130 | 17,50 | BWW 22 | 19.000 | 368 | 220 | 140 | 50 | 75 | 150 | 30,50 |
Custom designs are available upon request! |