PLGW Gamma

pewag winner profilift lifting point PLGW Gamma supreme eyebolt.
Close to perfection.

A lifting point that was developed and manufactured according to the very latest standards also deserves a promising name: pewag winner profilift gamma supreme.
Simply tighten by hand, then align in the load direction – a system that is ideally suited for frequent mounting/demounting. This patented system has proven itself from the beginning and promises unsurpassed ease-of-use.

The eyebolt is 360° rotatable, comes with an interchangeable special screw that is 100% crack-tested as well as chrome VI-free finish-protection against corrosion and is marked with the load capacity and the thread size. An integrated sleeve protects the surface of the load. The batch number displayed on all load-bearing parts such as the eye and screw as well as the serial number make identification, traceability and performance of mandatory, regular inspections simpler than ever.

PLGW supreme: tool-free assembly and disassembly
Latch in position 1: Latch is not in contact with the screw (fig. PLGW supreme rotatable)

  • The latch is held in place with a patented spring
  • The eyebolt is rotatable

Latch in position 2: Latch is in contact with the screw (fig. PLGW supreme disassembly)

  • The latch is held in place with a patented spring
  • The eyebolt is not rotatable, i.e. the fastening torque is transmitted to the screw and thus the eyebolt can be (re)assembled

PLGW basic:
A simplified alternative is the pewag PLGW pewag winner profilift gamma basic. Offering the same benefits as the pewag PLGW supreme in terms of measurement, load capacity and application, the pewag PLGW basic differs only when it comes to assembly.
This lifting point can be mounted hand tight using a standard Allen key then aligned in the load direction.
However, if the lifting point is to be utilised in a more permanent application the torque settings in the user manual must be observed.
For lifting point sizes M8-M20 use the special Allen key sold seperately (fig. Special Allen key).


-
Stock: Please specify product option(s).

Product query


Produktbeskrivning

Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table. Adjust the lifting point in the permitted load direction before loading.

  • Loadable with a 4-fold safety factor under break in all directions.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.
  • Assembly with additional tools (e.g. extension) is not permitted.

For additional details and information, please refer to the full operating manual.

Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut. Each lifting point comes with an individual serial number. Also available with peTAG upon request.

For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with the technical data.

3D-vyer

Videos

Specifikationstabell

PLGW Gamma Code / Type thread
[mm]
load capacity
[kg]
a
[mm]
b
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
n
[mm]
n max
[mm]
hexagon-wrench
[mm]
weight
[kg/pc.]
Measurement Image PLGW 0,3 t M8 300 25 45 10 27 53 35 15 90 6 0,20
PLGW 0,5 t M10 500 25 45 10 27 53 35 15 160 6 0,21
PLGW 0,7 t M12 700 30 55 12 32 63 43 20 160 8 0,29
PLGW 1,5 t M16 1.500 35 64 14 36 70 50 25 160 10 0,48
PLGW 2,3 t M20 2.300 40 73 16 41 81 54 30 160 12 0,58
PLGW 3,2 t M24 3.200 50 86 18 50 93 69 35 - 14 1,10
PLGW 4,9 t M30 4.900 60 110 25 60 114 90 45 - 17 2,20
PLGW 7 t M36 7.000 70 132 31 70 136 108 55 - 19 3,80
PLGW 9 t M42 9.000 80 152 36 72 153 126 65 - 22 5,70
PLGW 12 t M48 12.000 95 179 42 88 179 148 75 - 24 8,90
PLGW Gamma Code / Type thread
[inch]
load capacity
[lbs]
a
[inch]
b
[inch]
c
[inch]
d
[inch]
e
[inch]
f
[inch]
n
[inch]
n max
[inch]
hexagon-wrench
[inch]
weight
[lbs/pc.]
Measurement Image PLGW U 3/8 3/8"-16 1.100 0,98 1,77 0,39 1,06 2,09 1,38 0,59 - 1/4" 0,44
PLGW U 1/2 1/2"-13 1.500 1,18 2,17 0,47 1,26 2,48 1,69 0,79 - 5/16" 0,71
PLGW U 5/8 5/8"-11 3.300 1,38 2,52 0,55 1,42 2,76 1,97 0,98 - 3/8" 0,99
PLGW U 3/4 3/4"-10 4.400 1,57 2,87 0,63 1,61 3,19 2,13 1,18 - 1/2" 1,28
PLGW U 1 1"-8 6.600 1,97 3,39 0,71 1,97 3,66 2,72 1,38 - 9/16" 2,43
PLGW U 1 1/4 1 1/4"-7 8.800 2,36 4,33 0,98 2,36 4,49 3,54 1,77 - 5/8" 4,63
PLGW U 1 1/2 1 1/2"-6 15.400 2,76 5,20 1,22 2,76 5,35 4,25 2,17 - 7/8" 8,38
PLGW U 1 3/4 1 3/4"-5 19.800 3,15 5,98 1,42 2,83 6,02 4,96 2,56 - 1" 12,57
Method of lifting icon 1-legs 0-angle icon 1-legs 90-angle icon 2-legs 0-angle icon 2-legs 90-angle icon 2-legs 0-45-angle icon 2-legs 45-60-angle icon 3+4-legs 0-45-angle icon 3+4-legs 45-60-angle icon 2-legs asymm-angle icon 3+4-legs asymm-angle
Number of legs 1 1 2 2 2 2 3+4 3+4 2 3+4
Angle of inclination 90° 90° 0‑45° 45‑60° 0‑45° 45‑60° asymm° asymm°
PLGW Gamma Code / Type thread
[mm]
fastening torque
[Nm]
load capacity
[kg]
Measurement Image PLGW 0,3 t M8 Simply tighten by hand 1.000 300 2.000 600 420 300 630 450 300 300
PLGW 0,5 t M10 Simply tighten by hand 1.500 500 3.000 1.000 700 500 1.060 750 500 500
PLGW 0,7 t M12 Simply tighten by hand 2.000 700 4.000 1.400 980 700 1.480 1.050 700 700
PLGW 1,5 t M16 Simply tighten by hand 4.000 1.500 8.000 3.000 2.100 1.500 3.180 2.200 1.500 1.500
PLGW 2,3 t M20 Simply tighten by hand 5.000 2.300 10.000 4.600 3.200 2.300 4.800 3.400 2.300 2.300
PLGW 3,2 t M24 Simply tighten by hand 6.500 3.200 13.000 6.400 4.500 3.200 6.700 4.800 3.200 3.200
PLGW 4,9 t M30 Simply tighten by hand 12.000 4.900 24.000 9.800 6.900 4.900 10.300 7.300 4.900 4.900
PLGW 7 t M36 Simply tighten by hand 15.000 7.000 30.000 14.000 9.800 7.000 14.800 10.500 7.000 7.000
PLGW 9 t M42 Simply tighten by hand 22.000 9.000 44.000 18.000 12.600 9.000 19.000 13.500 9.000 9.000
PLGW 12 t M48 Simply tighten by hand 30.000 12.000 60.000 24.000 16.900 12.000 25.400 18.000 12.000 12.000
Method of lifting icon 1-legs 0-angle icon 1-legs 90-angle icon 2-legs 0-angle icon 2-legs 90-angle icon 2-legs 0-45-angle icon 2-legs 45-60-angle icon 3+4-legs 0-45-angle icon 3+4-legs 45-60-angle icon 2-legs asymm-angle icon 3+4-legs asymm-angle
Number of legs 1 1 2 2 2 2 3+4 3+4 2 3+4
Angle of inclination 90° 90° 0‑45° 45‑60° 0‑45° 45‑60° asymm° asymm°
PLGW Gamma Code / Type thread
[inch]
fastening torque
[ft-lbs]
load capacity
[lbs]
Measurement Image PLGW U 3/8 3/8"-16 Simply tighten by hand 2.400 1.100 4.800 2.200 1.500 1.100 2.200 1.500 1.100 1.100
PLGW U 1/2 1/2"-13 Simply tighten by hand 4.400 1.500 8.800 3.000 2.200 1.500 3.000 2.200 1.500 1.500
PLGW U 5/8 5/8"-11 Simply tighten by hand 8.800 3.300 17.600 6.600 4.600 3.300 6.600 4.800 3.300 3.300
PLGW U 3/4 3/4"-10 Simply tighten by hand 9.900 4.400 19.800 8.800 6.100 4.400 9.200 6.600 4.400 4.400
PLGW U 1 1"-8 Simply tighten by hand 11.000 6.600 22.000 13.200 9.200 6.600 13.600 9.900 6.600 6.600
PLGW U 1 1/4 1 1/4"-7 Simply tighten by hand 22.000 8.800 44.000 17.600 12.300 8.800 18.000 13.200 8.800 8.800
PLGW U 1 1/2 1 1/2"-6 Simply tighten by hand 33.000 15.400 66.000 30.800 21.500 15.400 32.300 23.100 15.400 15.400
PLGW U 1 3/4 1 3/4"-5 Simply tighten by hand 40.000 19.800 80.000 39.600 27.700 19.800 41.500 29.700 19.800 19.800
Safety factor 4
Important: Subject to technical changes!

Downloads

PLGW 0,3 t

PLGW 0,5 t

PLGW 0,7 t

PLGW 1,5 t

PLGW 12 t

PLGW 2,3 t

PLGW 3,2 t

PLGW 4,9 t

PLGW 7 t

PLGW 9 t

PLGW U 1

PLGW U 1 1/2

PLGW U 1 1/4

PLGW U 1 3/4

PLGW U 1/2

PLGW U 3/4

PLGW U 3/8

PLGW U 5/8